DIY Fabric Pumpkins

What you need:

Dollar Tree foam pumpkins
Fabric of your choice (15 inches x 16inches for each pumpkin. A yard covers 6 pumpkins)
Twigs or sticks from the yard
Artificial leaves
Hot glue

Step 1:

Cut your fabric 15 inches by 16 inches to cover the pumpkin. 

Step 2:
Cut the green top off of the foam pumpkin.

Step 3:
Cut a whole about the size of a quarter in the top of the pumpkin in the center.

Step 4:
Place your pumpkin in the center of your cut fabric and take one corner and pull it up tight into the hole that you cut out. Hold it there with your finger and repeat this process all the way around the pumpkin pleating as you go.

Step 5:
Once you are happy with your covered pumpkin place the leaves of your choice in the hole. Fill the center of the hole with hot glue and add the stick or twig of your choice in the middle of the pumpkin to complete this project!

Watch the video below to see the steps!