Whimsical Witch Legs DIY

918
0
Share:

These whimsical witch legs are so fun for Halloween! These legs would be perfect to hold your candy for trick or treaters or just to decorate with on your front porch or by your mantle!

What you need:

2×8 wood for boots
2×4 for top (holds legs together)
PVC or dowel rods (size of your choice) I used 3/4 PVC

Black paint
White paint pen
Spray paint or craft paint (I used orange, lime green and purple)
Electrical Tape
Jigsaw
Drill with hole drill bit

Print out your template and cut it out.
I used a 2X8 piece of wood and outlined the boot template on my wood. Turn the boot on its side and measure to the middle of each boot and mark it. This is where you are going to drill the holes for the PVC pipes!
Drill your boot holes. After we drilled the first one and got it how I wanted it. I used a ruler to see how many inches we drilled down.
For the second boot we drilled a little at a time until we got to the same measurement as the first boot! This makes it so your legs will be the same height and level!
I used a 10 inch 2×4 for the table on top of the legs I drilled holes an even distance away from each other!

I chose different heights for the legs. 18 inches and 24 inches and I cut the PVC pipe with a handsaw.
I spray painted the legs on dow rods so the coats were even.
Once they are dry, you can decorate in any way that you would like. I used black electrical tape to create black stripes.
I painted my black boots and drew X’s on the boots to mimic laces.
Assemble all of the parts together! I chose not to hot glue anything in place since I will probably take it apart for storage!

Watch the videos at the bottom to see the steps!

 

DIY with me now⬇️⬇️⬇️⬇️⬇️
Whimsical Witch Legs🎃

Posted by C Whimsy on Monday, September 2, 2019

 

Let dress up our whimsical witch legs⬇️

Posted by C Whimsy on Tuesday, September 3, 2019

Share: